Running toilets, wax ring leaks, weak flush, and new installs with fresh supply line and angle stop.
| Symptom | Usual cause | Fix |
|---|---|---|
| Runs on and off for no reason | Flapper hardened or warped | New flapper, seat clean |
| Runs forever until you jiggle the handle | Flush lever chain tension, flapper shape | Rebuild flush kit |
| Weak flush, swirls without clearing | Hard water clogged jet holes under the rim, or fill level too low | Clean rim jets, set fill mark, check flapper seal time |
| Water pooling at the base | Wax ring bad, tank bolt leak, cracked bowl | Pull, replace ring, reset, new bolts and supply |
| Gurgling when other drains run | Venting issue or partial main line clog | Inspect vent, or run main line camera |
| Whistling fill | Worn fill valve | Replace fill valve |
Lots of Brighton single level homes sit on slab. After decades the toilet flange can end up below tile grade. We stock flange extenders and offset flanges for those rehabs so you do not end up with a toilet that wobbles.
A standard swap is 60 to 90 minutes. Add flange repair and it stretches toward 2 hours.
Yes, we are happy to install customer supplied toilets. We inspect the box first and flag any damage.
