Leak Detection & Repair
Confirms whether you're dealing with an isolated leak or a systemic pattern before committing to a repipe.
Learn more →
Plumbing Services · Repiping
Repiping Services in Brighton, CO — PEX & Copper
Old galvanized and polybutylene pipe doesn't fail on a schedule you can plan around. We repipe homes in sections, using PEX, copper, or a mix of both, so water is restored the same day whenever possible.
PEX · Copper · Hybrid Systems
Field Equipment Manifest
- Sewer CameraCCTV line inspection & diagnosis
- Hydro-Jet UnitCalibrated 1,500–4,000 PSI
- Acoustic Leak SensorSlab & hidden leak detection
- PEX & Copper Fitting KitCrimp, expansion & sweat connections
Direct Answer
Repiping replaces a home's water supply lines, usually aging galvanized steel or 1980s-era polybutylene, with modern PEX, copper, or a hybrid of the two. It's typically the right call once pinhole leaks are showing up in multiple locations, water pressure has dropped house-wide, or hot water consistently runs discolored. Call (720) 664-0815 for an inspection that tells you whether a partial repipe or a full whole-house replacement actually fits your situation.
Patched This Leak Before?
Call (720) 664-0815
Patching the same kind of pinhole leak for the second or third time this year? Call (720) 664-0815 — if one section of old pipe is failing, the rest is usually close behind, and we'll tell you honestly whether a patch or a repipe is the smarter call.
What's Actually In Your Walls Depends On When Brighton Built It
Homes near historic downtown Brighton built before the 1960s often still run original galvanized steel supply lines. Galvanized pipe has an interior zinc coating meant to resist corrosion, but that coating wears away over decades, and once it's gone the steel underneath corrodes from the inside, narrowing the pipe, restricting flow, and discoloring the water. Some Brighton-area homes from the late 1970s through the 1990s were built with polybutylene, a gray or blue flexible plastic pipe that seemed like an upgrade at the time but degrades from chlorine exposure in municipal water and can split without warning rather than leaking gradually. Newer construction in developments like Prairie Center and Bromley Park typically runs PEX from the start.
None of these older materials get safer with age. Galvanized pipe keeps narrowing and corroding. Polybutylene keeps getting more brittle. And once pinhole leaks start appearing in more than one spot, that's rarely a coincidence, it's a sign the whole system is reaching the same point of failure at roughly the same time, just not all at once.
PEX, Copper, Or A Hybrid Of Both
PEX is flexible, requires fewer fittings, resists the corrosion and mineral buildup that affects copper in hard water, and flexes under freeze pressure rather than cracking as readily as rigid pipe, a real advantage through a Colorado winter. Copper has a longer track record, is naturally resistant to bacterial growth, and holds up well in exposed or outdoor sections where UV exposure would degrade PEX over time. Many repiping jobs don't have to pick just one: it's common to run copper for the first few feet off the water heater and PEX for the rest of the house, getting the strengths of both. We'll walk through your layout, your priorities, and your existing pipe condition before recommending a specific approach, not default to whichever material happens to be easiest for us to install.
How We Approach A Repipe
From Inspection To Restored Water Pressure
- 1Describe the symptoms.
Low pressure, discolored water, recurring leaks, or known galvanized or poly-B pipe in the home.
- 2We inspect exposed pipe and check age clues.
Material, condition, and how much of the system shares the same age and history.
- 3We discuss material options honestly.
PEX, copper, or a hybrid, based on your home's layout, exposure, and priorities.
- 4We scope partial vs. whole-house.
If most of the system is the same age and material, a full repipe is usually more durable than repeated patching.
- 5Work is completed in sections.
So your home isn't without water access for the entire project.
- 6Every new connection is pressure-tested.
Before walls are closed and fixtures reconnected.
Why Choose Us
No Default Material, No Guesswork
- 1We Install Both PEX And Copper
The recommendation is based on your home, not limited to whichever material we happen to prefer stocking.
- 2Hybrid System Experience
Combining copper and PEX where each performs best is a routine option, not an unusual request.
- 3Sectioned Work, Not All-At-Once Shutoff
We restore water access in stages wherever the layout allows it.
- 4Honest Partial-Vs-Whole Guidance
We'll tell you when a targeted repair is genuinely enough, not just recommend the bigger job.
Signs Your Home May Need Repiping
- Water pressure that's dropped noticeably throughout the house, not just at one fixture
- Rusty or discolored water, especially from the hot side
- Pinhole leaks showing up in different locations over time, not just one spot
- Visible corrosion, flaking, or a chalky white crust on exposed pipe
- Known galvanized steel or polybutylene pipe anywhere in the home's supply lines
- A pattern of patch-repairing leaks every year or two on the same system
What To Do Before We Arrive
- Note whether the issue affects the whole house or just certain fixtures
- If you know your home's build year, have it ready, it helps predict likely pipe material
- Point out any exposed pipe sections in a basement or crawlspace with visible corrosion
- Think through which rooms could tolerate being worked on in stages if a full repipe isn't done in one pass
Service Area
Repiping Across Brighton And Nearby
We provide repiping services throughout Brighton and Thornton, Commerce City, Henderson, Fort Lupton, and Northglenn.
Frequently Asked Questions
Repiping Questions, Answered Directly
Galvanized pipe is dull gray steel with visible threading at joints, usually found in homes built before the 1960s. Polybutylene is a flexible gray or blue plastic tube common in homes from the late 1970s through the 1990s. A quick inspection can confirm either.
PEX generally wins on cost, installation speed, and freeze tolerance. Copper offers a longer track record and holds up better in exposed outdoor sections. Many homes use both, copper near the water heater and PEX throughout the rest.
A partial repipe makes sense when the failing section is genuinely isolated from the rest of the system's age and material. If the rest of the home shares the same aging pipe, a full repipe is usually more durable than repeated targeted fixes.
PEX repipes are often completed in a few days thanks to fewer fittings and faster connections. Copper repipes typically take a bit longer because each joint requires soldering. Layout complexity affects both timelines.
We work in sections wherever your home's layout allows it, so water access is typically restored at the end of each work day rather than staying off for the full project.
PEX has some flexibility to expand under freeze pressure rather than cracking as readily as rigid copper, which is a real advantage through a Front Range winter, though proper insulation matters for either material.
Yes, this is a common approach, often copper for the first section near the water heater and PEX for the branch lines throughout the rest of the house.
Related Services
Often Considered Alongside Repiping
Water Softener & Filtration
Reduces the mineral load that shortens the life of both new and existing pipe going forward.
Learn more →Water Heater Repair & Installation
Often bundled with a repipe when the water heater's supply and fittings are part of the same aging system.
Learn more →
Old Pipe Doesn't Get Safer With Time
Call (720) 664-0815
Galvanized and polybutylene pipe don't improve while you wait — they just get closer to the leak you haven't found yet. Call (720) 664-0815 and get a straight recommendation on PEX, copper, or a repipe that actually fits your home.